Applications:

Ready for use on flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters,concrete,brickwork, fibreglass, felt, slate, metal (Galvanised and Ferrous), aged uPVC.
Can be brush or squeegee applied.
Not for use on Walkways or Balconies, new asphalt or new bitumen surfaces or timber substrates, new uPVC, GRP, Copper, Brass or Lead.
High Build Coat: for patch repair/all over roof coating
Standard Coat: for an all over covering on a roof.

Project where Aquashield was used:

Before                                        After

Download Aquashield High Build Data Sheet

Systems Include;

•Durus Elite

3-10mm screed system MMA for car parks and high profile projects

•TM Flex

A unique system that no other manufacturer has an equivalent to.

•Eurogard TM

A rapid curing MMA balcony system

•Eurogard HD

An epoxy resin based coating for hygiene areas & computer rooms

Durus Elite

Ultra fast curing characteristics

Tough, resilient, and high durable

Range of slip-resistant and skid resistant finishes

Resistant to oil, petrol, diesel and many industrial chemicals

Flexible and abrasion resistant

Colour options allow easy differentiation of specific areas e.g walkways and parking bays in diferent colous.

Low temperature cure

3-10mm screed available

Highest performance in its sector

Applications: Car park Decks, Walkways, Areas subject to Heavy Fork lift traffic, Roof walkways, Window access tracks, Ramps, Turning Areas, Ship Decks, Landing Piers and Railway platforms.

Eurogard TM Flex

Eurogard TM Flex is another quality system that as been developed in conjunction with Sheffield University Polymer Contre.

TM Flex has the remarkable quality of being waterproof whilst trafficable

Simple to apply, quick to dry, can be applied in 1/6th of the time of the market leading system. (Tri-Flex)

Offers a more cost effective application than the current Euroc/TM System.

Can be used on cracked substrates

Dries in 30 minutes

Trafficable in 1 hour

Flexible and Durable

Colour fast

Chemical resistant

98 colour options

Eurogard Balcony & Terrace Trafic Coat

Slip resistant surface coating using advanced resin technology

Quick and easy to apply in both internal and external applications

Trafficable from 30 minutes

Integral slip resistant finish

103 colours, durable through colour finish

Eurogard HD

Eurogard HD is a 2 pack epoxy system that is solvent free.

Waterproof and chemical resistant.

Application areas include;

Hospitals ( as a Hygiene coating )

Marine Concrete

Bund walls ( even nuclear waste bunds as at Harwell )

Plant rooms

Computer room floors

Water features

Available in Sprey Grade, Brush or Roller Grade, Trowel Grade or Geotextile.

Products

Liquid Rubber was developed to address the recurring problems encountered by conventional membrane systems. Our products are state of the art, with respect to todays environmental concerns and safe working practices.

The products consist of stable, non toxic, odourless, non-flammable liquid components which do not present a storage or transportation hazard prior to, during or following application.

Spray Grade

Liquid Rubber formulated for Spray Grade application:-
Spray Grade as the name implies is a spray applied monolithic (seamless) membrane. As with all the Liquid Rubber it is cold applied and solvent free whilst offering instant set. This enables shorter windows of opportunity required to carry out the application. Liquid Rubber is a totally slump free system for horizontal or vertical surfaces.

High Build

Liquid Rubber High Build has been formulated for brush or roller application. High Build is used for total protection of metal, wood, concrete and composite surfaces. Many current alternatives such as alkyds, urethanes, vinyl and epoxy based coatings are unsatisfactory due to VOC (Volatile Compound) content.

Therefore many industrialized countries have considered banning all cold tar and V.O.C based coatings. However, there has been resistance due to the void that would be created when it appeared there would be no viable substitute, until now – High Build:

• Performance
• One coat system
• Minimal surface preparation
• Environmentally Friendly
• Non-Toxic
• Odourless
• High Puncture Resistance
• Seamless – No laps
• Fully Bonds to most substraight
• Does not track
• Ozone and UV resistance
• Can withstand to Thermal Cycling

Trowel Grade

Trowel Grade is a modified elastomeric emulsion specially formulated for providing a water tight seal around building fixtures, pipes, roof penetrations or cracks.

Trowel Grade is applied using a trowel; the product fully cures in 24 hours at 200C (700F) and 50% humidity, when applied to appropriate thickness. Apply in thin coats, allow to dry before applying subsequent coats to achieved desired thickness. Do not apply at temperatures below 100C or apply to wet or frozen surfaces or directly before rain.

Geotextile

Liquid Rubber Geotextile Reinforcement is used to bridge seams, joints, gaps and holes etc.

Apply a liberal coat of Liquid Rubber to the area to reinforce. Cut a length of reinforcement and place on the Liquid Rubber, press down with a clean paint brush until smooth. Then apply a liberal coat to completely cover the geotextile, allow this to cure until black before overcoat.

Tecnical Information Sheets:

Spray Grade SDS

Safe Handling

Order Conditions

Liquid Rubber Warranty

High Build SDS

cossh trowel grade

cossh Spray grade

cossh high build

Chemical Resistance Chart

CCMC

asbestos information

The Phoenix range of products are products are refurbishment coatings designed to extend the life of a current building.

These systems both waterproof and make the tired building aesthetically pleasing

Systems include:

Eurotec 3000

An asbestos encapsulation system

Cladcoat 1000

A plastisol and Galbestos coating

Clearcoate

A roof light repair/coating system

Eurosol

Asphalt paint to protect against UV (wide colour range)

Eurotec 3000 asbestos encapsulation cleaning system

Fully automated system available for larger projects.

Both recycle the runoff water.

Cladcoat 1000

Cladcoat 1000, simple, protective and decorative coating

for Galbestos and/or Plastisol sheeting.

Available in 98 colours, spray or roller applied.

The features of these systems are;

Monolithic

Cold Applied

UK produced

Independently tested for quality

Independently guaranteed ( option )

Available in a wide range of colours

Simple to apply

Allows detailing to complex roofs

Cost effective agains market leaders

Why are these systems for advanced?

Quantum flat roofing coatings are different to the market leading systems such as Decathane in that we use state of the art polymers in our products. This means that our formulations are produced with advanced resins not just bulk polymers.

What does this mean and what are the benefits?

Most liquid coatings are based on Polyurethane formulations and have been on the market for over 40 years. These formulations have changed slightly but are still based upon bulk polymer technology. The bulk polymer will just flop onto a substrate like a blanket of snow. Our Advanced formulas work in a very different way!

Working at a mulecular level, our system bond to a bitumen substrate to become part of the existing membrane, be it asphalt or bitumen felt. The benefit in this advanced technology is that the bond to the deck is absolute and therefore issues such as wind uplift, sheet de-lamination & leak source pinpointing are minimised.

Quantum Liquid Systems:

We currently have 2 repair coatings. These are economy products that can be used for small repairs or cost effective full project coating.

Euroshield is a well established coating with over 1M mt2 being sold into Japan every year.

Euroshield

Synthetic bitumen resin coating

Damp tolerant

Cold applied, no hot works insurance

Overcoat in 2 hours

Allows limited foot traffic

No further solar reflective required

Tins can be opened and re-sealed

Anti-corrosive

Up to 15 year guarantees

Applications:

Exposed Concrete

Roofs (flat or pitched)

Gutters

Structural Metal

Parapets

Pipe Work

Subtrates: Euroshield can be applied to almost any substrate from timber to metal to asbestos sheet.

No primer is required (generally)

Features and beneficts: Euroshield is a rigid coating so will not cope with structural movement very well. Euroshield is very cost effective. Limited colours options